AT825 SINGLE POINT STEREO MICROPHONE-LOW IMPEDENCE
Click on the picture below to get more information on AT825 SINGLE POINT STEREO MICROPHONEs:
 AUDIO TECHNICA - AT825 SINGLE POINT STEREO MICROPHONE-LOW IMPEDENCE Buy Today @ The Sound Professionals, Inc. |
Designed for broadcast, professional recording, and DAT field use, Audio-Technica’s compact, lightweight AT825 is perfect for camera-mount applications. The microphone is equipped with two balanced outputs for use with professional audio and video equipment. Its closely matched elements provide the spatial impact and realism of a live sound field. With switchable low-frequency roll-off the versatile AT825 operates on either battery or phantom power.
- Designed for broadcast and professional recording, and DAT field use
- Compact, lightweight design is perfect for camera-mount applications
- Closely-matched elements provide the spatial impact and realism of a live
sound field
- Switchable low-frequency roll-off
- Operates on battery or phantom power
- Includes a 16.5' (5 m) cable (5-pin XLRF to two standard 3-pin XLRM connectors)
SPECIFICATIONS |
|
| ELEMENTS | Fixed-charge back plate, permanently polarized condenser |
|
|
|
| POLAR PATTERN | X/Y Stereo |
|
|
|
| FREQUENCY RESPONSE | 30-20,000 Hz |
|
|
|
| LOW FREQUENCY ROLL-OFF | 150 Hz, 6 dB/octave |
|
|
|
| OPEN CIRCUIT SENSITIVITY | -47 dB (4.4 mV) re 1V at 1 Pa |
|
|
|
| CHANNEL BALANCE | <=2.5 dB |
|
|
|
| IMPEDANCE | 200 ohms balanced |
|
|
|
| MAXIMUM INPUT SOUND LEVEL | 126 dB SPL, 1 kHz at 1% T.H.D. |
|
|
|
| DYNAMIC RANGE (typical) | 102 dB, 1 kHz at Max SPL |
|
|
|
| SIGNAL-TO-NOISE RATIO | 70 dB, 1 kHz at 1 Pa |
|
|
|
| PHANTOM POWER REQUIREMENTS | 5-52V DC, 2 mA typical (each channel) |
|
|
|
| BATTERY TYPE | 1.5V AA/UM3 |
|
|
|
| BATTERY CURRENT / LIFE | 2 mA / 1000 hours typical (alkaline) |
|
|
|
| SWITCH | Flat, roll-off (recessed) |
|
|
|
| WEIGHT | 8.5 oz (240 g) |
|
|
|
| DIMENSIONS | 8.43" (214.0 mm) long, 2.44" (62.0 mm) head width, 0.83" (21.0 mm) body diameter |
|
|
|
| OUTPUT CONNECTOR | Integral 5-pin XLRM-type |
|
|
|
| CABLE | 16.5' (5 m) long, 8 conductors under two shields, vinyl-jacketed, stereo cable with 5-pin XLRF-type connector at microphone end, two 3-pin XLRM-type connectors at output end |
|
|
|
| ACCESSORIES FURNISHED | AT8405a stand clamp for 5/8"-27 threaded stands; battery; AT8120 windscreen; soft protective pouch |
|
|
|
| AUDIO-TECHNICA CASE STYLE | S3 |
|
|
|
SPECIFICATION GRAPHS |
||
| Click on the chart to view the larger image | ||
 |
||
 |
||
 |
||
The Sound Professionals carry the widest selection and have the lowest prices on AT825 SINGLE POINT STEREO MICROPHONEs.